Multiquip C30HDZ manual Operation and Safety Decals

OPERATION AND SAFETY DECALS

Figure 5 display's the operation and safety decals as they appear on the concrete pump, should any of these decals become damaged or unreadable, contact the Multiquip Parts Department for a replacement set.

C A U T I O N

When the pump, manifold or delivery system plugs, do not disconnect the delivery system clamps or open the manifold. A plug has occurred when the pump is running but no concrete is discharging from the end of the delivery system: immediately switch the engine OFF consult your operating a d instruction manual before proceeding.

Great care must be taken to clear a plug as a dangerous condition exist, due to high pressure build-up, inside the pump and delivery system.

932

P/N EM932

CAUTION !

1.Before setup and operation of this equipment, the designated operator MUST read and completely understand the operating instruction manual.

2.Keep unauthorized and untrained people away from the machine during operation.

3.Do NOT operate unit with engine cover open: rotating or moving parts will

cause serious injury. ( An automatic shutdown switch has been installed on the hood to prevent this.

4. Engine must be shut off before servicing.

5. Keep hands out of hopper when engine is running.

6.Check hopper for obstructions before operating machine.

7.This machine is remotely controlled and may start at any time.

8. Stop the engine before adding fuel or oil.

CAUTION

NORMAL

1”

LOW

Before starting engine, check that the oil level inside the “LUBE BOX” is within the indicated operating range. Recommended oil type SAE 30.

DCL 152

P/N DCL152

MAINTENANCE

GREASE DAILY, EVERY ZERK

Use No. 2 Multipurpose Automotive Grease

P/N EM513165

W A R N I N G

Refer to the owner’s manual for safe
operating procedures.
Welding on the main frame or other
components may void warranty.
Refer to owner’s manual for proper use
of the piston lubrication sytems.
Failure to utilize the rear stabilizer leg	98022
while pumping could damage axle.
P/N 98022

513165

508594

P/N 508594

C-30HDZ

P/N 513119

OWNER’S MANUAL

P/N 34536

			OIL
OIL PRESSURE		BATTERY	TEMPERATURE
PUMPING CONTROL			REMOTE
			OUTLET
PUMP OFF	REMOTE
ON	ON	ENGINE HOURS
ON
OFF	START

	P/N EM1028		quartz
		IGNITION
		SWITCH
	NAMEPLATE
		310-537-3700		THROTTLE
		800-421-1244 NATIONWIDE
		FAX: 310-537-3927
CONTACT PARTS DEPT.		MAYCO INC 18910
		WILMINGTON AVENUE CARSON,
		CALIFORNIA 90746

P/N 513163

Figure 5. Operation and Safety Decals

513163

PAGE 20 — MAYCO C30HDZ PUMP — OPERATION AND PARTS MANUAL — REV. #12 (04/03/12)