Multiquip DCA-25SSI— OUTPUT VOLTAGE SETUP, Single Phase: 120 Volt, Single Phase, 240 Volt

DCA-25SSI — OUTPUT VOLTAGE SETUP

Voltage Selector Switch- Single Phase 240/120V Position

The following are additional voltages available when the 240/120V position.

Single Phase: 120 Volt

This setting can provide single phase power at 120 volts. After hooking up the hard wires to the lugs as shown in Figure 29, 120 volts can be obtained by using the voltage regulator to fine tune.

Figure 29. Hard Wire Hookup for Single Phase, 120 volt

Figure 27. Voltage Selector Switch 240/120V Single Phase

Position

Single Phase, 240 Volt

This setting can provide single phase power at 240 volts. After hooking up the hard wires to the lugs as shown in Figure 28, 240 volts can be obtained and using the voltage regulator to fine tune.

Figure 28. Hard Wire Hookup for Single Phase 240 volt

PAGE 35 — DCA-25SSI — PARTS AND OPERATION MANUAL—FINAL COPY(06/29/01)