ST-45HRM CE CONCRETE PUMP— LUBRICATION PANEL
GREASE POINTS
Grease daily, two or three hots of #2 multipurpose automotive
NOTE grease. Over greasing any bearing will not damage the machine. ALWAYS grease before and after pump operation.
POSITION | LOCATION | LENGTH OF LINES |
A | PIVOT BRACKET GREASE POINT | 41 in. (1.04 m) |
B | AXLE CRANK GREASE POINT | 34 in. (.86 m) |
C | SWING AXLE BUSHING GREASE POINT | 26 in. (.66 m) |
PAGE 120 — MAYCO