ST-45HRM CE CONCRETE PUMP— INSPECTION
ENGINE OIL CHECK
7.Remove the engine oil dipstick from its holder (Figure 12).
12The oil listed in Table 4 is recommended to ensure better engine performance. Use class CD or higher grade motor oil.
Figure 12. Engine Oil Dipstick
8.Make sure pump is placed on level ground.
9.Pull the engine oil dipstick (Figure 13) from its holder.
Figure 13. Engine Oil Dipstick
10.Verify that oil level (Figure 13) is maintained between the two notches on the dipstick.
11.If the pump's engine oil is low, fill engine crankcase with lubricating oil through filler hole, but DO NOT overfill.
Hydraulic Oil
13.Determine if the hydraulic oil level is low by observing the level of the oil in the Hydraulic Oil Sight Glass (Figure 14).
Figure 14. Hydraulic Oil Sight Glass
PAGE 30 — MAYCO
