Appendix A DocumentIt Options
DocumentIt User Guide A-2 ni.com
model This Xmath option is
used for creating the
.rtf file. When
invoking from the OS,
the .rtf file must
already exist;
therefore, there is no
OS option equivalent.
A text string representing the name of
aSuperBlock in the SystemBuild
Editor—for example, System.
msrtf -msw1 Provides special parsing for Microsoft
Word documentation generation. Ignores
the \par parameter in the rich text format
(RTF) when you use @@ and merges a
word when it is divided across two lines.
options -opt A string specifying the name of the
options file. Options are entered in the file
using the same syntax as if they were
specified in an operating-system call to
AutoCode outside Xmath, except that
options normally passed as strings must
not be quoted. Command options
override all the options in this file, and
theRTF file name cannot be given here.
Single line comments are done by using
// characters. Refer to the Using the
autostar.opt File section for more
information about the options file.
rtf The name of the .rtf
file must always be
specified when
invoking from the
command prompt.
A string specifying the RTF file name.
You can use the RTF file along with the
standalone AUTOCODE command to
regenerate code. The RTF file is
generated using the CREATERTF
command.
Table A-1. Command Options when Invoking DocumentIt (Continued)
Xmath Option OS Option Description