Appendix E Generating Documents Using Microsoft Word
© National Instruments Corporation E-3 DocumentIt User Guide
7. In the File Name field, enter Controller_Logic.doc. This output
file is created in your working directory unless you specify another
path.
8. With the Block Parameters combo box, select %Vars from Xmath.
9. In the Template File field, specify msgwp.tpl as the template file.
10. Click the Typecheck checkbox.
11. Click the MS Word checkbox.
12. To generate the document file, click OK.
If you have any graphics files to include in the document, complete the
following steps, beginning with the Generating an .emf file from
SystemBuild section. If you have no graphics to include, skip to step1 of
the Changing the Generic Title Page section.
Note After you generate a document file, you may need to make format changes to select
desired fonts or font sizes, or make other typographic choices.
Generating an .emf file from SystemBuild
To generate an Enhanced Metafile (.emf file) from SystemBuild for
Microsoft Word, complete the following steps:
1. Highlight the top level SuperBlock (Controller_Logic).
2. Select File»Page Setup to make any adjustments to the image before
creating the graphics file. In this case, click OK to accept the defaults
or Cancel.
3. Select File»Print to File.