National Instruments 370769C-01

Appendix D Generating 2167A Documents Using Interleaf

DocumentIt using ilmil.tpl will continue to have your new

title page until you change the contents of ilmil.tpl again.

• Using a text editor you can edit the ASCII output file you have just

generated. Figure D-2 shows the data in the example file

controller_logic_mil.asc that produces the title page

shown in FigureD-1. If you regenerate the document, you will

have to edit this file again.

• If you are familiar with Interleaf, you can edit the title page after

you have opened the file from Interleaf.

2. From the system prompt, invoke Interleaf.

3. From Interleaf open Controller_Logic_mil.asc.

4. After the file is opened, you will see that it is completely formatted.

5. If the new document meets your specifications, you can save and

print it.

Note Refer to the Using Your Own Templates section for information about using your

templates instead of the supplied templates.

You can use the DocumentIt template ilmil.tpl and its associated

include file ilmilinc in precisely the same manner for your own models

to generate a document using Interleaf.

To generate documentation using your own templates, copy the supplied

example files and modify them. The purpose of each file is given in

Table D -1.