National Instruments 370769C-01

Appendix C Generating 2167A Documents Using FrameMaker

<bull2> Second level bulleted list.

<CDRL> Title page CDRL sequence number. Refer to FigureC-2.

<chap> Chapter heading level.

<Client> Title page entry for the name of the client for whom the document was

prepared. Refer to FigureC-2.

<contract> Title page entry for the contract number. Refer to FigureC-2.

<DocTitle> Document title. Refer to Figure C-2.

<EXample> Numbered title of an example (automatic numbering).

<EXinit> Numbered title of an example (reset count to 1).

<EXtext> Text format for programming example.

<FIGcap> Automatically numbered figure caption.

<head1> First heading level (for example, 1.1).

<head2> Second heading level (for example, 1.1.1).

<head3> Third heading level (for example, 1.1.1.1).

<head4> Fourth heading level (for example, 1.1.1.1.1).

<head5> Fifth heading level (for example., 1.1.1.1.1.1).

<list1> Numeric list (automatic numbering).

<list1init> Numeric list (automatic numbering reset to 1).

<list2> Alpha list (automatic numbering).

<list2init> Alpha list (automatic numbering reset to a).

<NOTE> Note paragraph with the word NOTE included.

<NOTE+> Indented paragraph that aligns with the text in the NOTE paragraph.

The word NOTE is not included. This is used when a note has a second

paragraph.

<PrepBy> Title page entry. Refer to FigureC-2.

<PrepFor> Title page entry. Refer to FigureC-2.

<Rev> Revision and date entry on the title page. Refer to Figure C-2.

Table C-2. FrameMaker 2167A MML Commands (Continued)

Command Description