Appendix B Generating Documents Using FrameMaker
DocumentIt User Guide B-8 ni.com
location you specified. Use the FrameMaker capture feature to
capture and import the figure that you want into the anchored
frame.
• If you are familiar with FrameMaker, you can create an anchored
frame and import the figure you want directly into your
FrameMaker document by completing the following steps.
a. Highlight the top level SuperBlock (Controller_Logic).
b. Select File»Page Setup to make any adjustments to the
image before creating the graphics file. In this case, accept the
defaults.
c. Select File»Print to File.
d. From the Format pull-down menu, select EncapPostScript.
e. From the Output pull-down menu, select Separate files.
f. Click OK.
Note If the .eps illustration is too large for the anchored frame, use the FrameMaker
Graphics Scale option to adjust the size.
2. From the system prompt in the document directory, start
FrameMaker.
3. From FrameMaker, open fmgp.doc. You will find a blank file, with
the exception of vertical lines on the left side of the page.
4. From the pull-down menu, select File»Import.
5. Select Copy File into Document.
6. Select Controller_Logic.mml and click OK.
7. After the import is complete, you will still have a blank page, except
for a single paragraph text symbol at the top of the page somewhat
hidden in the top portion of the vertical lines. Select the paragraph
symbol and delete it.
The title page of the Software Design Document fills the page. Do not
be concerned if the vertical lines display as broken lines; they will be
restored as soon as you page through the document.
Note Do not save this file until you are prompted to do so.