NEC 5800/320MA manual Ethernet Team Properties

Configuring Ethernet PCI Adapters

Figure 2-13. Ethernet Team Properties

4.In the Internet Protocol (TCP/IP) Properties dialog box (see Figure 2-14), select Obtain an IP address automatically or Use the following IP address. If you select Use the following IP address, enter the IP address, subnet mask, and default gateway. Consult your network administrator for all TCP/IP property settings.

N O T E

Your TCP/IP property settings must match the configuration of the network to which the team or VLAN is connected. Select Obtain an IP address automatically only if the network supports it. If you select it and the network does not support it, the Ethernet PCI adapter may be unusable.

2-26Express5800/320Ma: PCI Adapter Guide