NEC 5800/320MA manual Figures

Figures

Figure 1-1.	PCI Adapter Slot Numbering	1-4
Figure 2-1.	Faceplate of the U575 PCI Adapter	2-2
Figure 2-2.	RJ-45 Connector	2-6
Figure 2-3.	Initial PROSet Dialog Box	2-8
Figure 2-4.	Identify Adapter Dialog Box	2-16
Figure 2-5.	Setting the Link Speed and Duplex Mode	2-17
Figure 2-6.	Verifying Link Speed, Duplex Mode, and Link Activity	2-18
Figure 2-7.	Selecting the Type of Team	2-19
Figure 2-8.	Selecting Ethernet PCI Adapters for a Team	2-20
Figure 2-9.	Assigning Priorities to Ethernet PCI Adapters	2-21
Figure 2-10.	Adding a VLAN to a Team	2-22
Figure 2-11.	Specifying a VLAN ID and Name	2-23
Figure 2-12.	Network Connections Window	2-25
Figure 2-13.	Ethernet Team Properties	2-26
Figure 2-14.	Internet Protocol (TCP/IP) Properties	2-27
Figure 2-15.	Removing an Ethernet PCI Adapter from a Team	2-29
Figure 2-16.	Confirmation Message: Removing an Ethernet
	PCI Adapter from a Team	2-29
Figure 2-17.	Icon for a Missing (Removed) Adapter	2-30
Figure 2-18.	Adding an Adapter to a Team	2-31
Figure 2-19.	Obtaining the Ethernet Address for a Team	2-33
Figure 2-20.	Obtaining the Permanent Ethernet Address of an
	Ethernet PCI Adapter	2-33
Figure 2-21.	Removing a Team of Ethernet PCI Adapters	2-35
Figure 2-22.	Confirmation Message: Removing a Team	2-35
Figure 2-23.	Status LEDs on Embedded Ethernet Ports	2-36
Figure 2-24.	Network Statistics in PROSet	2-39
Figure 2-25.	Network Statistics in ftSMC	2-40
Figure 2-26.	PROSet Diagnostics	2-42
Figure 3-1.	Faceplate of an Optical Fibre Channel PCI Adapter	3-3
Figure 3-2.	LC Connector of a Fibre Channel Optical Cable	3-6
Figure A-1.	Removing and Installing Low- and High-Profile Faceplates	A-1

vExpress5800/320Ma: PCI Adapter Guide