NEC 5800/320MA manual Checking Status LEDs, Status LEDs on Embedded Ethernet Ports

Troubleshooting Ethernet PCI Adapters

•“Checking Status LEDs” on page 2-36

•“Checking Cables of Ethernet PCI Adapters” on page 2-38

•“Verifying Link Data Rate and Mode” on page 2-38

•“Checking the Network Statistics” on page 2-38

•“Using PROSet Utility Diagnostics” on page 2-41

Checking Status LEDs

Examine the status LED for each PCI slot of the system to verify that the slots are functioning normally. For more information about interpreting PCI slot status LEDs, see the operation and maintenance guide for your system, as listed in Table 1-2.

If the PCI slots are functioning normally, examine the status LEDs on the individual Ethernet PCI adapters.

The rear of each CPU- I ⁄ O enclosure has two connector ports for the embedded 10/100/1000 Ethernet PCI adapter. Each connector port has two status LEDs, shown in Figure 2-23. Table 2-10describes the meaning of the embedded Ethernet port status LEDs on the systems.

Figure 2-23. Status LEDs on Embedded Ethernet Ports

1

2

asys029

1ACT/LINK (Green) LED of the embedded 10/100/1000-Mbps Ethernet port

210/100/1000 (Green/Amber) LED of the embedded 10/100/1000-Mbps Ethernet port

2-36Express5800/320Ma: PCI Adapter Guide