Configuring Ethernet PCI Adapters
2-24 Express5800/320Ma: PCI Adapter Guide
2. Verify that an IP address has been assigned to each team or VLAN.
•If you have created a team without VLANs, the team requires an IP address.
(The individual Ethernet PCI adapters in a team have no IP addresses.)
To find the IP address for a team in PROSet, click the entry for the team and
see the IP Address in the Team Configuration tab.
•If you have created a team with VLANs, each VLAN in that team requires an IP
address. (The team and the Ethernet PCI adapters in the team have no IP
addresses.)
To find the IP address for a VLAN in PROSe t, click th e entry for the VLAN an d
see the IP Address in the VLAN Configuration tab.
If a team or VLAN does not have an IP address, assign it one. See “Assigning an
IP Address to a Team or VLAN” on page2-24.
3. Start ftSMC, select each Network Port you teamed, and in the details pane, verify
that the value next to OpState: State is Duplexed.
Assigning an IP Address to a Team or VLAN
1. Click Start, point to Control Panel, and double-click Network Connections.
2. In the Network Connections control panel (see Figure 2-12 for an example),
right-click the appropriate Team #n or VLAN Name, ID: n icon, and then click
Properties.