NEC 5800/320MA manual Specifying a Vlan ID and Name

Configuring Ethernet PCI Adapters

Figure 2-11. Specifying a VLAN ID and Name

4.In the same dialog box, enter a Name for the VLAN. The name is only for identification, and it does not need to match the name of VLAN on other network devices.

5.Click OK. The new entry for the VLAN appears in Virtual LANs, under the team entry in the left pane of the Intel(R) PROSet for Wired Connections dialog box.

To add additional VLANs, repeat step 2-5. (You can create up to 64 VLANs on a system.)

6.Click Apply in the Intel(R) PROSet for Wired Connections dialog box to process and save the changes.

Verifying the Configuration of Teams and VLANs

1.Close and restart the PROSet utility (see “Starting PROSet” on page 2-)7. In PROSet, ensure that:

•The teams and VLANs have been created as you expected.

•All Ethernet PCI adapters in a team use the same Ethernet address, and that address is the permanent Ethernet address of one of the Ethernet PCI adapters in the team. (For ALB teams with receive load balancing enabled, each Ethernet PCI adapter uses its own permanent Ethernet address.) See “Updating a Team’s Ethernet Address” on page 2-32for more information.

Ethernet PCI Adapters 2-23