Director
Network Port 1
Network Port 2 +
Network Port 3 
Network Port 4 
XFP Port 1.1
Network Port 11 
XFP Port 1.2
lter add
Figure 32: Configurable 10 Gigabit XFP ports used as Monitor ports (with aggregation)
To use one XFP port as a Span port and the other XFP port as a Monitor port:
1.Enter filter add in_ports=t1.1 ip_proto=6 action=redir redir_ports=m.1. A filter has been defined to select all IPv4 TCP packets from 10 Gigabit Port 1.1 and copy them to Monitor Port 1. 10 Gigabit XFP Port 1.1 is configured as a
Span port.
2.Enter filter add in_ports=n1.11 action=redir redir_ports=t1.2. A filter has been defined to copy all the traffic from 1 Gigabit Network Port 11 to 10 Gigabit Port 1.2. 10 Gigabit XFP Port 1.2 is configured as a Monitor port.
3.Enter filter commit. The filters are activated.
XFP Port 1.1 |
| Protocol = |
| Monitor Port 1 |
| TCP |
| ||
|
|
|
|
Network Port 11 
XFP Port 1.2
lter add in_ports=t1.1 ip_proto=6 action=redir redir_ports=m.1 lter add in_ports=n1.11 action=redir redir_ports=t1.2
Figure 33: Configurable 10 Gigabit XFP ports used one Span port and one Monitor port
32
