Manuals / Net Optics / Computer Equipment / Switch

Net Optics manual Director Filter Parameters Qual Value Example Description, Vlan=128

Models: Director

1 59

Download 59 pages 36.95 Kb

Page 54

Director

Director Filter Parameters

<qual>	<value>	Example	Description

ip_proto	Number*	ip_proto=6	Layer 4 IP protocol

ip_src	IPv4 address	ip_src=168.10.4.1	IPv4 source address

ip_src_mask	IPv4 address mask	ip_src_mask=255.255.255.0	Mask for IPv4 source address

ip_dst	IPv4 address	ip_dst=168.10.4.2	IPv4 destination address

ip_dst_mask	IPv4 address mask	ip_dst_mask=255.255.255.0	Mask for IPv4 destination ad-
			dress

ip6_src	IPv6 address	ip6_src=1234:5678:9abc:def0:12	IPv6 source address
		34:5678:9abc:def0

ip6_src_	IPv6 address mask	ip6_src_mask=	Mask for IPv6 source address
mask		ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff

ip6_dst	IPv6 address	ip6_dst=1234:5678::9abc	IPv6 destination address

ip6_dst_	IPv6 address mask	ip6_dst_mask=	Mask for IPv6 destination ad-
mask		ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff	dress

l4_src_port	Port number	l4_src_port=80	Layer 4 source port

l4_src_port_	Port mask	l4_src_port_mask=ffff	Mask for Layer 4 source port
mask

l4_dst_port	Port number	l4_dst_port=80	Layer 4 destination port

l4_dst_port_	Port mask	l4_dst_port_mask=fff0	Mask for Layer 4 destination
mask			port

mac_src	MAC address	mac_src=01:23:45:67:89:ab	MAC source address

mac_src_	MAC address mask	mac_src_mask=ff:ff:ff:ff:ff:ff	Mask for MAC source address
mask

mac_dst	MAC address	mac_dst=11:22:33:44:55:66	MAC destination address

mac_dst_	MAC address mask	mac_dst_mask=ff:ff:ff:ff:ff:00	Mask for MAC destination
mask			address

vlan	VLAN number	vlan=128	VLAN

* See Appendix C for a complete list of protocol numbers. Some common protocols include:

Number	Keyword	Protocol

1	ICMP	Internet Control Message Protocol
2	IGMP	Internet Group Message Protocol
6	TCP	Transmission Control Protocol
17	UDP	User Datagram Protocol
89	OSPF	Open Shortest Path First
132	SCTP	Stream Control Transmission Protocol

50

Image 54

Net Optics manual Director Filter Parameters Qual Value Example Description, Vlan=128

Contents

Data Monitoring Switch Trademarks and Copyrights Contents Appendix a Chapter Configuring Filters Using the CLIChapter Appendix BChapter Introduction Monitor port Filtering Key FeaturesEase of Use Passive, Secure TechnologyAbout this Guide DescriptionDirector Architecture Director internal architectureUSB port Director ManagementTypical Application Network LinksMonitoring Tools 10 Gigabit in-line network connection using a network Tap In-line Monitoring of 10 Gigabit LinksMonitor Port LEDs Power LEDsDirector Front Panel DNM / Network Port LEDsDirector Rear Panel XFPChapter Installing Director Plan the Installation Unpack and Inspect the Director deviceInstall Director Network Modules Install SFP and XFP Monitor port ModulesRack Mount the Director device Connect Power to Director Connect the local CLI InterfaceTip Connect the remote CLI InterfaceBaud Data bits No parity 1 stop bit No flow control To connect the CLI for remote use over the Management portLog into the CLI To log into the CLIConfigure Director using the CLI Change Director PasswordTo change the login password To assign a new Manager IP address to Director To change the port modeAssign a New Manager IP Address Change Port ModesSave and Load Director Configurations Set the Current Date and TimeUsing the CLI Help Command To view CLI help informationUsing the CLI Command History Buffer Show name show running, factory, default, or file nameConnect Span Ports to Director To connect a Span portConnect Director With In-line Network Links To connect an in-line network linkConfigure a Matrix Switch connection in Director Check the InstallationConnect Monitoring Tools to Director Chapter Configuring Filters Using the CLI SyntaxEnter filter commit. The switch connection is activated Copy Traffic From Any Network Port to Any Monitor PortRegenerate Traffic to Any Set of Monitor Ports Lter add inports=n1.1 action=redir redirports=m.3-m.5Create Filters To create a filter that selects IPv4 packets by protocolCreate Complex Filters Logical and filter connectionView filters UDPWork with configurable 10 Gigabit ports Configurable 10 Gigabit XFP ports used as Network portsXFP Port Protocol = Monitor Port Understand filter interactions CAMFlow diagram now looks as follows Exclusive filters N1.1 ipproto=UDP action=drop N1.1 m.1To change the Director filter configuration Understand pending and active filtersFilter running command Enter filter list to view the pending filter list Filter capacity Inports=n1.1-n1.7 Ipproto=6 Vlan=100 Redirports=m.1-m.5,m.10Daisy-chaining Multiple Director Chassis Appendix a Director Specifications Specifications, chassisCertifications Specifications, DNMEnvironmental Available ModelsAppendix B Command Line Interface Command Sub-Command Arguments Example and description CommitFilter discard Image Quit User add name=bob pw=bob-pw priv=3 Filter parameters Director Filter Parameters Qual Value Example Description Vlan=128Appendix C Protocol Numbers Num Keyword ProtocolMobile L2TP Limitations on Warranty and Liability By Net Optics, Inc. All Rights Reserved