Net Optics Director manual Command Sub-Command Arguments Example and description, Commit

Director

Command	Sub-Command	Arguments	Example and description
!		[#] (a number)	!3
			Executes a command from the CLI command history
			buffer
			(see history command)
commit			commit
			Activates pending changes previously defined using
			filter commands AND saves the changes as the new
			default configuration
date		<date>	date 06/24/2008
			Arguments:
			<date> is mm/dd/yyyy
			Sets the system calendar date; if <date> is omitted,
			the current date is displayed
del		<filename>	del my_configuration-1
			Arguments:
			<filename> is the name of the file to delete; a
			string; do not include an extension
			Deletes a previously saved Director configuration file
			(see save command)
exit			exit
			Exits the CLI shell (same as logout and quit)
			Note: To maintain system security, control is not
			returned to the command shell.
filter	add	ipv6=y	filter add in_ports=n1.1-n1.3 ip_src=10.1.1.1
		in_ports=<network_portlist>	action=drop
		<qual>=<value>	Arguments:
		action=< redir drop >	ipv6=y for IPv6 addressing; omit for IPv4
		redir_ports=<monitor_portlist>	<network_portlist> — traffic from the network
			ports specified in this portlist is aggregated before
		Notes:	being sent to the filter
		The command may include	<qual> and <value> are filter qualifiers and values
			as listed in the table that follows this table; any
		any number of <qual>, up
			number of <qual>=<value> pairs may be included
		to the limit of Director's filter
			Specify redir or drop as the filter action —
		resources (approximately
			if redir, packets matching all of the <qual> are
		1,000 <qual> per chassis)
			copied to all of the Monitor ports specified in the
		The action=< redir drop >
			portlist <monitor_portlist>
		argument is required
			if drop, packets matching all of the <qual> are
		If action=redir, then	dropped
		redir_ports=<monitor_portlist>	Defines a filter, including the network and monitor
		argument is required	ports involved in the filter; filter is pending (inactive)
			until activated by a filter commit or commit command
			Note: If the filter command does not include any
			<qual>, it defines aggregation, regeneration, and
			matrix switching functions without filtering
	clear		filter clear
			Clears all active filters

44