Net Optics Director manual Image

Director

Command	Sub-Command	Arguments	Example and description
image		< 1 2 >	image 2
			Arguments:
			Valid values are 1 and 2
			Chooses which system image to boot from (see
			upgrade command)
	show		image show
			Lists the names of both system images and indicates
			which one is running, and which one is selected to
			boot from (arrow next to image name)
list			list
			Shows a list of filenames of saved Director device
			configurations (see save command)
load		<filename>	load my_configuration-1
			Arguments:
			<filename> is the name of the file to load; a string;
			do not include an extension
			Loads a previously saved Director configuration (see
			save command)
logout			logout
			Exits the CLI shell (same as exit and quit)
			Note: To maintain system security, control is not
			returned to the command shell.
module	show		module show
			Lists information about Director hardware modules
			including system serial number, DNM types, and
			XFPs
passwd			passwd
			Interactively changes the password of the SSH user
This			account
command
is only
available
at root
level
ping		<address>	ping 10.1.1.4
			Arguments:
			<address> is an IP address
			Pings the specified IP address to check for connectivity
port	set	ports=<portlist>	port set n1.1-n1.3 autoneg=on duplex=full
		autoneg=< on off >	Arguments:
		duplex=< full half >	<portllist> is a portlist
		speed=< 10 100 1000 >	For other arguments, select a value from the
			listed choices
			For 10/100/100 Copper interface Network and Moni-
			tor ports, enables or disables autonegotiation; selects
			the duplex mode; and sets the fixed speed (10Mbps,
			100Mbps, or 1000Mbps) if autonegotiation is off
	show		port show
			Displays the current port status and settings

46