Using your Roadster V.92 Modem with FaxTalk
Configuring voice/fax mailboxes
Voice/fax mailboxes are the basic type of mailbox used by FaxTalk Communicator. These mailboxes can receive both voice messages and faxes. You can also configure a Voice/ fax mailbox to act as an announce only or fax only mailbox.
To change the settings of a Voice/fax mailbox, select the desired mailbox and click Properties. A Voice/fax mailbox contains three configuration tabs.
General settings
The General tab contains the mailbox settings such as mailbox name, maximum message length, and remote access password.
Voice /Fax Mailbox General Configuration Screen
Setting the maximum message length You can control the length of time a caller has to leave a message. Each mailbox can be set to a specific message length of between 1 and 999 seconds. To change the maximum message length:
1.Click the up or down arrows on the Maximum Message Length setting to change the value. You can also type a new value directly into the field.
2.Click OK to save the change.
www.netcomm.com.au | Rev.1 - YML658 |
Page 16 | AM5698 Roadster V.92 User Guide |
