PPPoE Client Mode
1.Click on WAN on the left menu.
2.Change the IP Type to DHCP.
3.Enter the username and password supplied by your Internet Service Provider.
4.After that, click the Submit button.
Option | Description |
|
|
User Name | Your PPPoE username. This is normally specified by your Internet Service Provider (ISP). |
|
|
Password | Password for the above PPPoE account. |
|
|
Service Name | The name of your service provider. (Optional) |
|
|
5.Click on Save Settings/Reboot on the left menu and then click the Save & Reboot button to save your settings.
6.The NetComm ATA will reboot automatically to make your changes effective. Please wait while it reboots.
YML881Rev1 | �V110,���V2��10P,����V2��11,��V220���� User Guide |
www.netcomm.com.au | 17 |
