IVR Interface for VoIP Gateway
You can use the PSTN phone to configure the NetComm ATA. Please follow the instruction below to configure it.
Group | IVR Action | IVR Menu Choice | Parameter(s) | Notes: |
Function | Reboot | #195# | None | After you hear “Option |
|
|
|
| Successful,” |
|
|
|
| system will reboot automatically. |
Function | Factory Reset | #198# | None | System will automatically |
|
|
|
| Reboot. WARNING: ALL “User- |
|
|
|
| Changeable” NON DEFAULT |
|
|
|
| SETTINGS WILL BE LOST! This |
|
|
|
| will include network and service |
|
|
|
| provider data. |
Info | Check IP Address | #120# | None | IVR will report the LAN port IP |
|
|
|
| address |
Info | Check IP Type | #121# | None | IVR will report the WAN Port |
|
|
|
| DHCP is enabled or disabled. |
Info | Check the Phone | #122# | None | IVR will report the VoIP number |
| Number |
|
| in use. |
Info | Check Network | #123# | None | IVR will report the WAN Port |
| Mask |
|
| network mask |
Info | Check Primary DNS | #125# | None | IVR will announce the current |
| Server Setting |
|
| setting in the Primary DNS field. |
Info | Check IP Address | #126# | None | IVR will report the WAN port IP |
|
|
|
| address |
Info | Check Firmware | #128# | None | IVR will announce the version of |
| Version |
|
| the firmware running on the VoIP |
|
|
|
| Gateway. |
Setting | Set DHCP client | #111# | None | The system will change to DHCP |
|
|
|
| client type |
Setting | Set Static IP Address | #112xxx*xxx*xxx*xxx# | Enter IP address using | DHCP will be disabled and |
|
|
| numbers on the telephone key | system will change to the Static |
|
|
| pad. Use the *(star) key when | IP type. |
|
|
| entering a decimal point. |
|
Setting | Set Network Mask | #113xxx*xxx*xxx*xxx# |
| Must set Static IP first. |
Setting | Set Gateway IP | #114xxx*xxx*xxx*xxx# |
| Must set Static IP first. |
Setting | Set Primary DNS | #115xxx*xxx*xxx*xxx# |
| Must set Static IP first. |
| Server |
|
|
|
Setting | Set Codec | 1:G.711 | You can set the codec you want | |
|
|
| Law, 3:G.723.1, 4: G.729a, 5: | to the first priority. |
|
|
| G.726 16K, 6:G.726 24K, 7: |
|
|
|
| G.726 32K, 8: G.726 40K, |
|
| Set Handset Gain | #131+[00~15]# | Handset Gain from 0~15 | You can set the Handset gain to |
|
|
|
| proper value, default is 6 |
| Set Handset Volume | #132+[00~12]# | Handset Volume from 0~12 | You can set the Handset volume |
|
|
|
| to proper value, default is 10 |
V110,V2�10P,V2�11,V220� User Guide | YML881Rev1 |
60 | www.netcomm.com.au |
