Virtual Server
Virtual Servers are used for port forwarding from the WAN to LAN networks. If any local PCs need to be mapped to the UDP/TCP port on WAN side, you can enter the mappings here. There can be up to 24 different Virtual Server configurations.
Options | Description |
|
|
Virtual Server Page | Default page is Page1. There are 3 pages, Page 1 to Page 3 |
|
|
Num | Show the number by sequence. There are a total of 24 numbers from mapping 0 to |
| mapping 23 that can be set. |
|
|
Enable | Check to enable the port forwarding protocol. |
|
|
Protocol | TCP or UDP. |
|
|
In Port | Internal port number on the LAN side. |
(Internal Port) |
|
|
|
Ex Port | External port number on the WAN side. |
(External Port) |
|
|
|
Server IP | Display the private network IP address for the particular server. |
|
|
Select | Select the item of the Virtual Server |
|
|
Enable Selected | Enable selected item |
[Button] |
|
|
|
Delete Selected | Delete selected item |
[Button] |
|
|
|
Delete All [Button] | Delete all items |
|
|
Reset [Button] | Reset selected item |
|
|
YML881Rev1 | �V110,���V2��10P,����V2��11,��V220���� User Guide |
www.netcomm.com.au | 51 |
