NetComm V110 manual Auto Update, Update via, Server TFTP, FTP or Http, Firmware

Auto Update Page

The NetComm ATA can check and update the firmware automatically either when powering up or via a schedule.

Options	Description
Update via	Enable or disables the Auto Update function. To enable, select the type of auto update
	server – TFTP, FTP or HTTP.
TFTP Server	The address of the TFTP.
HTTP Server	The address of the HTTP server.
HTTP File Path	The path where the file is located.
FTP Server	The address of the FTP server.
FTP Username	The username for the FTP server.
FTP Password	The password for the FTP server.
FTP File Path	The path where the file is located.
Check new	Determines when the NetComm ATA will check for new firmware. When power ON is
firmware	selected the ATA will check for updates when powering up. If scheduling is selected, the
	VoIP gateway will check for updates using the schedule set below.
Scheduling (Date)	The VoIP Gateway will check if there is new firmware on the TFTP/FTP/HTTP Server
	periodically. The range of the Scheduling Date is 1 - 30. Default is 14.
Scheduling (Time)	Default is AM 00:00- 05:59. The VoIP Gateway will check if there is new firmware on
	the TFTP/FTP/HTTP Server periodically. There are four Scheduling Time: AM 00:00-
	05:59, AM 06:00- 11:59, PM 12:00- 17:59, PM 18:00- 23:59

V110,V2�10P,V2�11,V220� User Guide	YML881Rev1
58	www.netcomm.com.au