NETGEAR WNDR3300f manual Restoring the Default Password and Configuration Settings

Wireless Router Setup Manual

Table 2. Wireless Router Default Configuration Settings (continued)

Feature		Default Setting
	Operating Frequency Ranges (5G)	5.18–5.24 + 5.745–5.825 GHz (US)
		5.18–5.24 GHz (Europe ETSI)
	802.11 Security	40-bit (also called 64-bit) and 128-bit WEP, WPA-
		PSK and WPA2-PSK.

Restoring the Default Password and Configuration Settings

You can restore the factory default configuration settings that reset the router’s user name to admin, the password to password, and the IP address to 192.168.1.1.

This procedure will erase all the current configuration settings and restore the factory defaults.

To restore the factory default configuration settings:

1.Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings button, located on the rear panel of the router, for about 20 seconds, until the Power light begins to blink (see “Back Panel” on page 4).

2.Release the restore factory settings button, and wait for the router to restart, and for the Power light to stop blinking and become solid green.

The factory default settings will be restored so that you can access the router from your Web browser using the factory defaults.

40 Technical Specifications