Wireless Router Setup Manual
Front Panel
Figure 2
You can use the status lights on the front of the wireless router to verify various conditions.
Table 1. | Status Light Descriptions | |||
|
|
|
| |
Item | Function | Activity | Description | |
|
|
|
| |
1. | Power | Solid Green | Power is supplied to the router. | |
|
|
| Fast Blink Green | The unit is starting up, or the restore factory settings button is being |
|
|
|
| pushed to restore the factory default settings. |
|
|
| Slow Blink | Firmware is corrupted. See “Checking Basic Router Functions” on |
|
|
| Green | page 28 for instructions on restoring your router firmware. |
|
|
| Off | Power is not supplied to the router. |
|
|
|
| |
2. | 2.4 GHz | Solid Ambera | The unit is operating in Legacy G mode at 2.4 GHz | |
| Mode |
|
| (5 GHz Mode [item 3] is also on). |
|
|
| Solid Greenb | The unit is operating in 11n mode at 2.4 GHz |
|
|
|
| (5 GHz Mode [item 3] is off). |
|
|
| Blinking Amber/ | Data is being communicated over a wireless network. |
|
|
| Blinking Green |
|
|
|
|
| |
3. | 5 GHz | Solid Bluec | The unit is operating in 11n mode at 5 GHz | |
| Mode |
|
| (2.4 GHz Mode [item 2] is also on, amber). |
|
|
| Off | 11n mode at 5 GHz is off |
|
|
|
| (2.4 GHz Mode [item 2] is on, green). |
|
|
| Blinking Blue | Data is being communicated over the wireless network. |
|
|
|
| |
4. | Internet | Off | No Ethernet cable is connected to the modem. | |
|
|
| Solid Amber | The Ethernet cable connection to the modem has been detected. |
|
|
|
|
|
Getting to Know Your Wireless Router | 3 |
