NTI AUDIO/HD VIDEO MATRIX SWITCH
Video Switch Page
The Video Switch page (right) displays the active connections (shown in orange) and enables the user to control the audio and video connections of the
Note: Configuration 0 will be automatically loaded when the
To change a connection, click on the radio button (square image with circle in the center) that intersects the input and output columns. A black dot will be placed in the circle to indicate the selection. Then press the Submit button. The display will be reloaded with the selections changed to orange to indicate they are now active. Multiple connections can be changed simultaneously.
To quickly clear the selected radio buttons press the Clear Changes button. This will only work if the Submit button has not already been pressed with the selections made.
To quickly connect all outputs to a single input, choose the desired input from the "Set all Outputs to Input"
Figure 10- Web interface Video Switch page
Note: If radio buttons are selected in addition to using the "Set all Outputs to Input" option, the selections made by the "Set all Outputs to Input" will take precedence when the Submit button is pressed. Selections that conflict with it will be ignored.
To save a configuraton, from the Stored Configurations user interface, use the
Note: This will save the currently active configuration on the
Note: If changes to the active configuration have been made by another user prior to saving the
current connection selections, the changes made by the other user will be saved as the configuration.
The webpage configuration that loads after a Save is the configuration that was actually saved.
17
