![](/images/new-backgrounds/1174811/17481171x1.webp)
NTI AUDIO/HD VIDEO MATRIX SWITCH
RACK MOUNTING INSTRUCTIONS
This NTI switch was designed to be directly mounted to a rack. It includes a mounting flange to make attachment easy. Install 4 captive nuts to the rack in locations that line up with the holes (or slots) in the mounting flange on the NTI switch. Then secure the NTI switch to the rack using four 3/16" diameter screws (not provided). Each screw should be of sufficient length to go completely through the NTI mounting flange, rack frame and fully engage all threads in the captive nut. Be sure to tighten all mounting screws securely.
Do not block power supply vents in the NTI switch chassis (if provided) . Be sure to enable adequate airflow in front of and behind the NTI switch.
Attach all cables securely to the switch and where necessary supply adequate means of strain relief for cables.
Rack
|
| Captive |
R NETWORK | 1275 Danner Drive Tel: | Nuts |
TECHNOLOGIES | Aurora Ohio 44212 Fax: | |
NTI INCORPORATED | www.nti1.com |
3/16” Diameter
Screws
Figure 23- Mount the VEEMUX-A to a rack
32