Network Technologies SM-8X4-HDA Infrared Control, Features And Functions, Keypad, LCD Display

NTI AUDIO/HD VIDEO MATRIX SWITCH

INFRARED CONTROL

(Optional)

The IRT-64X32 (or IRT) is an infrared remote transmitter that enables the user to control up to four (4) NTI VEEMUX-A Video Matrix switches via an infrared receiver from up to 50 feet away (with an unobstructed view). The IRT is battery-powered and always ready to use. The IRT will have a blank display unless an action is being selected by the user. The IRT enables the user

to make connections between any input (video source) and any output (display device) on up to four (4) separate switches.

Note: Multiple switches that are located close to each other and are to be individually controlled must be pre-configured (by NTI) to be identified by the IRT as switches #1, #2, #3, or #4. Please ask your salesperson to have switches configured accordingly at time of order. Unless otherwise specified, by default, all IRT-enabled switches will be configured as switch #1.

Materials included:

•IRT-64X32 Infrared Remote Transmitter for video matrix switches

•(2) AA Cell Batteries- installed

Features And Functions

Keypad

¾Buttons Numbered 0-9 – Used for port selection

¾OUT – Pressed to validate and transmit the Output selection

¾IN – Pressed to validate and transmit the Input selection

¾SYS – Pressed to choose the switch to be controlled or to configure the maximum number of inputs/outputs

NTI R

Network Technologies Inc

SW Lo Batt

1 2 3

4 5 6

7 8 9

OUT 0 IN

SYS

IRT-64X32

LCD Display

¾The first digit of the LCD will display the number of the switch to be controlled followed by the decimal point. This way the user will always know which switch will be effected by the IRT.

¾The last two digits in the LCD represent 1) the desired input or output port to be connected or 2) the desired switch to be controlled when changing switches.

¾The "Lo Batt" decimal point will illuminate when the user should change the batteries.

¾The LCD will automatically power-down after 30 seconds of non-use and power-up with the press of any button.

Represents Input or

Output

SW Lo Batt

Represents switch to be controlled

25