Nextel comm I465 manual To the Contacts list or press . to return to standby mode

to the Contacts list or press . to return to standby mode.

TocreateaContactsentry:

1.Press / >Contacts>[NewContact].

2.To assign a name to the entry:

Select Name. Enter the name and press r.

3.To assign a ring tone to the name:

Select Ringer and then select a ring tone.

4.To assign a Contacts type to the number or address being stored:

Select the Contacts type field.

Select a Contacts type (Mobile, DC, Work1, Work2, Home, Email, Fax, Pager, Talkgroup, Group, Message Group, IP or Other).

5.To store a number or address:

Select the # field (or ID for an email address, or IP for an IP address).

Enter the number or address. For phone numbers, use the ten-digit format. For Direct Connect numbers, be sure to include the asterisks (*).

For email addresses, see “Entering Text” on page 15.

When you are finished, press r.

6.To assign more options to the number, including Speed# and VoiceName, select [Options] and proceed to steps 7-9. Otherwise, skip to step 10.

7.The default Speed Dial number assigned to a phone number is displayed in the Speed# field. This is always the next available Speed Dial location. To assign the phone number to a different Speed Dial location:

With the Speed# field highlighted, press r.

Press Delete (right softkey) to delete the current Speed Dial number.

Enter the new Speed Dial number and press r.

8.To create a voice name for a number, select Voice Name. Follow the prompts to record a name. Speak clearly into the microphone.

9.When you are finished, press Back (right softkey).

10.To add more numbers or addresses to the entry:

Scroll past the information you already entered.

Contacts

8. Contacts 99