Nextel comm I465 manual Starting a Call by Sending a Picture, Receiving a Picture

Tosendapictureduringacall:

1.While in a Direct Connect call, press Picture(right softkey). A list of pictures that can be included in a Direct Connect call appears.

2.Select a picture and press the DC button to send it.

3.Wait while the picture is transmitted. The Direct Connect call is temporarily interrupted while a picture is transmitted.

4.When prompted, press the DC button to resume the Direct Connect call.

Note	The first time you send a stored picture after turning
	the phone on, the message Picture Fees May Apply
	appears and you are prompted to respond. Press
	Yes (left softkey) to send the picture. Press No (right
	softkey) to cancel.

Tip	When a person sends you My Info from his or her
	phone, including his or her Direct Connect number
	and IP address, you can then easily store this
	information to Contacts from the Recent Calls list

Tostartacallbysendingapicture:

1.Press / >MediaCenter and then highlight or select a picture.

2.Press / > SendVia...>SendviaPTT.

3.Select AContactor ARecent Call. These names have Direct Connect numbers and IP addresses stored.

4.Select a name and press the DC button to send the picture.

5.When prompted, press the DC button to resume the Direct Connect call.

Starting a Call by Sending a Picture

You can start a call by choosing a stored picture from the Media Center.

To do this, you must have the recipient’s Direct Connect number and IP address stored in your Contacts.

Receiving a Picture

When someone sends you a picture using Nextel Direct Send, your phone emits a tone or vibrates and a message appears on the display asking you to accept the picture.

34 3. Making and Answering Calls