Nextel comm I465 manual Entering Text Using Word Text Input, Adding a Word to the Database

Entering Text Using Word Text Input

Word text input (iTAP) reduces the number of keystrokes needed to enter a word by predicting complete words as you type. While you enter letters, Word mode matches your keystrokes to words in its database and displays the most commonly used matching word. You can add your own words to this database.

Note	To use Word text input, you must turn the Complete
	Word setting on. From a text entry screen, press />
	Text Settings > Compl. Word and select On. Press
	Back (right softkey) to return to the text entry screen.

1.Select the Word text input mode.

2.Begin entering a word using the keyboard. (For example, to enter the word “nutrient,” press

N U T.) (If you make a mistake, press D to erase a single character. Press and hold D to erase an entire entry.)

3.To accept a word and insert a space, press I.

4.If the word that appears is not the desired word, press the navigation key up or down to change the word on the display to the next most likely word in

the database. Repeat until the desired word appears.

Adding a Word to the Database

If a specific word is not displayed as an option when you are using Word, add it to the database.

1.Select the Alpha text input mode. (See “Selecting a Text Input Mode” on page 15.)

2.Enter the word. (See “Entering Text Using Alpha Mode” on page 17.)

3.Select the Word text input mode.

The word will appear as an option the next time you scroll through options during Word.

Tochangethetextinputsettings:

1.On a text entry screen, press /.

2.Select TextSettings.

3.Select your PrimaryInput and SecondaryInput language, and whether you want CompleteWord and NextWordfeatures to be on or off.

16 2. Phone Basics