Nextel comm I465 manual Silence All, Ring and Vibrate, This icon/ appears on the display

/The phone vibrates then rings for all calls.

,The ring volume is set to zero for all calls.

Ring and Vibrate

Tosetyourphonetoringandvibratewhenyoureceive phonecallsorCallAlerts:

1.Press / >RingTones.

2.Make sure VibrateAll is set to Off.

3.Scroll through the list and select a ring tone.

4.Press / > Assignw/Vibe.

5.Select PhoneLine1 and/or PhoneLine2 and press Done (left softkey).

This icon/ appears on the display.

Silence All

The Silence All option allows you to mute all sounds without turning your phone off.

ToactivateSilenceAll:

With the phone in standby mode press and hold the volume key down until the ringer level is set at 0. (The screen will display ,.)

TodeactivateSilenceAll:

Press the volume key up repeatedly to select a volume level.

Tosetyourphonetovibrateinsteadofmakingasoundfor somefeaturesbutnotothers:

1.Press / >RingTones.

2.Make sure VibrateAll is set to Off.

3.Select Vibrate from the list of ring tones.

4.Select the feature(s) to which to assign Vibrate and press Done (left softkey).

Note	To set ring options for Direct Connect calls, Group
	Connect calls, and Talkgroup calls, see “Vibrate
	Settings” on page 72.

Settings

6. Settings 73