Printers and Computers, Televisions, to Connecting
Connecting to a Computer
6 Disconnect the camera once transfer is complete.
If the USB option is set to [PTP]
Turn the camera off and disconnect the USB cable.
If the USB option is set to [Mass storage]
Remove the camera from the system as described below before turning the camera off and disconnecting the USB cable.
Windows XP Home Edition/Windows XP Professional
Click the [Safely Remove Hardware] icon in the taskbar and select [Safely remove USB Mass Storage Device] from the menu displayed.
Windows 2000 Professional
Click the [Unplug or Eject Hardware] icon in the taskbar and select [Stop USB Mass Storage Device] from the menu displayed.
Macintosh
Drag the untitled camera volume (“NO_NAME”) to the Trash.
jConnecting the USB Cable
When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an angle.
kMarking Pictures for Transfer
When d is pressed while the camera is connected to a com- puter, pictures marked with the E icon during playback will be transferred to the computer. As the default setting, all pictures are automatically marked for transfer. Two options control transfer marking:
•[Interface] > [Auto transfer] in the setup menu (c 126): Choose [On] to mark all new pictures for transfer (default setting).
2006.10.10 100NIKON
15:30 0004.JPG
M
E
N O
4
4
86 • [Transfer marking] in the playback menu (c 112): Change marking for existing pictures.