The One-Touch Portrait Menu

Press m in one-touch portrait mode to display the one-touch portrait menu. In addition to image mode and exposure compensation, portrait effects (reducing vividness of skin tones, softening overall image) can be set.

ZImage mode1

Choose an image size and quality (c 97).

IExp. +/– 2

Adjust exposure for very bright or very dark subjects (c 101).

BPortrait effect1

Choose from [Normal], [Brighter] (reduces vividness of skin tones), and [Softer] (soft effect).

1The options chosen in this menu are stored until [Reset all] (c 127) is performed in the setup menu.

2The options chosen in this menu will be reset by switching to other shooting modes.

jFace-Priority AF

•The camera’s ability to detect faces depends on a variety of factors, including whether or not the subject is facing the camera.

•The camera focuses continuously until a face is detected.

•If the yellow double border blinks when the shutter-release button is pressed halfway, the camera was unable to focus. Release the button and try again.

•If no face is recognized when the shutter-release button is pressed halfway, the camera focuses on the center of the frame.

•The camera may be unable to detect faces in the following situations:

-When faces are partially hidden by sunglasses or other obstructions

-When faces take up too much or too little of the frame

kSettings for One-Touch Portrait Mode

•Flash: Changeable

•Self-timer: Available

•Macro close-up: Off

Mode Portrait Touch-One

51