Charging the Battery

Steps First

Charge the battery before first use or when the battery is running low.

1 Connect the COOL-STATION and AC adapter, and plug the power cable into an outlet (c 15).

The AC adapter power-on lamp will light.

2 Turn the camera off.

If the power-on lamp is lit, press the power switch to turn off the camera. You cannot charge the battery while the camera is turned on.

3 Place the camera in the COOL-STATION (c 14).

The multi connector should be fully inserted.

4 Charge the battery.

The indicator lamp next to the camera monitor will blink green as the battery charges. If the lamp flickers rapidly, the camera is not correctly inserted or the battery is faulty. Reinsert the camera or replace the battery.

A fully exhausted battery will recharge in about two hours.

5 Charging is complete.

The indicator lamp stops blinking when charging is complete.

6 Remove the camera.

Make sure to unplug the power cable from the power outlet.

18