Inserting the Battery

Removing the Battery

Turn the camera off before removing the battery. To eject the battery, open the battery-chamber/ memory card slot cover and slide the battery latch in the direction shown (1). The battery can then be removed by hand (2).

• Note that the battery may become hot during use; observe due caution when removing the battery.

Turning On and Off the Camera

To turn on the camera, press the power switch. The power-on lamp will light and the monitor will turn on. To turn off the camera, press the power switch again.

If the camera is turned off, press o for about a second to turn the camera on in playback mode (c 30).

jNote on the Battery

Be sure to read the warnings for the battery on page ii and “Caring for the Camera” (c 162) to make use of this camera.

Steps First

17