Anti-shake Mode

Shooting in Anti-shake Mode

Anti-shake mode offers the following features:

•This mode reduces effects of camera shake or blurred subjects, and pro- duces clear images.

•[Electronic VR] (c 106) and [BSS] (best shot selector) are enabled. Elec- tronic VR compensates blurred images. BSS is on, camera takes shots to a maximum of ten, they are compared and sharpest picture (picture with highest level of detail) is saved (c 104).

•The higher sensitivity is set and the shutter speed will be faster than in L (auto) mode.

•Flash mode and self-timer are set to off.

1 Press d (F) (anti-shake).

The camera enters anti-shake mode. Press again to return to the shooting mode selected with the mode- selection menu.

 

 

 

 

2 Frame the subject and take the

 

 

 

 

 

B M

picture.

 

W

When vibration is detected during shooting,

 

 

 

automatic compensation is activated.

 

 

When compensation is complete, new copy

is stored. The L icon (c 8) for the new 8 copy is displayed when played back.

jNotes on Anti-shake Mode

•Shutter speed is limited to a certain value for dark subjects.

•Use of the high-sensitivity mode (c 36) is recommended for shooting subjects in dark places.

•Pictures taken in this mode may become somewhat grainy.

•Even if [Date imprint] (c 121) is enabled, the date will not be imprinted.

lImage Mode and Exposure Compensation in Anti-shake Mode

When m is pressed in anti-shake mode, the menu is displayed to enable set the image mode (c 97) or exposure compensation (c 101). Settings made for exposure compensation are reset when the camera is switched to another mode.

Mode shake-Anti

49