For Connection via Home Wireless LAN
Settings | Descriptions | |
Configure* | Select [Auto] (default setting) or [Manual] for the method of | |
setting the camera IP address. | ||
| ||
|
| |
IP Address | When [Configure] is set to [Manual], enter the IP address for | |
the camera. | ||
| ||
|
|
Mode Transfer Wireless
142
jWireless LAN Channels
Wireless LAN channels for the COOLPIX S7c are from 1 to 11. Make sure that the channel for your computer’s wireless LAN device is set to a channel between 1 and 11 (inclusive).
jMAC Address Filtering
When MAC address filtering is enabled, only devices with an authorized MAC address can access the wireless LAN. Check the camera’s MAC address in [Firmware Version] of the setup menu (c 129) and add it to the authorized list.
jPort Number
For wireless communication, the UDP port number is “5353” and the TCP port number is “15740”. If the computer or access point has a firewall, the firewall settings may need to be changed.
lNotes on Profile Devices
•Configure profiles for each computer using the Setup Utility and install the Setup Utility to each computer to transfer (receive) pictures from the camera remotely.
•You can configure a maximum of nine profile devices (computers, printers connected to a computer, the optional
•Start the Setup Utility while the camera is connected to a computer via USB cable, and you can rename or delete profiles. Choose [Rename/Delete profiles] in the action selection screen of the Setup Utility and click [Next]. Then choose a profile you wish to rename or delete and click [Rename] or [Delete]. You can also confirm the details of a profile by click- ing [View Profile]. Choose [Reset camera] in the action selection screen to delete all profiles (all address book contents are also deleted).