Transferring Pictures
When Transfer is Complete
The message shown at right is displayed when the transfer is complete.
•To repeat the transfer, press d.
•To exit wireless transfer mode, press D and choose another mode, or turn off the camera.
Mail sent. Closed connection to alias.
Select SSID
kWireless Transfer LED
The wireless transfer LED (c 6) is located on the side of the camera (inside the antenna). The camera is searching for profiles when the LED blinks, a wireless connection is established when the LED is lit, and the camera is disconnected from a wireless LAN when the LED is off. If transfer is not performed for a while, the LED may blink to save power.
kNote on Wireless Transfer Mode
The camera strap eyelet may become hot during wireless communication (i.e., when the wireless transfer LED is lit or is blinking). Observe due caution when handling the camera.
kThe Memory Card
When the memory card
Mode Transfer Wireless
kWhen the Transfer is Unsuccessful
When transfer is unsuccessful, the next time you attempt transfer, the confirmation dialog shown at right will be dis- played. If necessary, you can change profiles from the confirmation dialog. Complete transfer, making sure that it was successful.
kSelecting a Computer or Printer
When the selected SSID has multiple computers or printers registered, the screen shown at right will be displayed after step 3 (c 143). Select the desired computer or printer.
Resume interrupted transfer?
No
Yes
Change SSID
Choose profile
kChecking SSID Contents
Pressing the zoom control to v(l) in the SSID selection screen displays the information for the selected profile including the network name (SSID), type of computer and printer.
144
SSID: My Network
TYPE: Home SSID
Profile: