26
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
En-01
R145_En_00_26 2010/ 01/25 19:50
This lens is available with a lens protective glass
attached.Keepingthisglassonthelensisrecommended
at all times.
•Ifthepictureyouwanttotakeincludesabrightlight
source, removing this glass may reduce ghost images.
To detach the glass, unscrew by rotating the rubber
ring around the glass (1, 2).
•Storetheglassinthededicatedlensprotectiveglass
case provided.
■ The built-in flash and vignetting To prevent vignetting, do not use the lens hood.
Cameras Supported focal length/Shooting distance
D90,D80,D50 •200mm/3m(9.8ft.)orgreater
•250mmorlonger/Norestriction
D70-Series
•200mm/4m(13.1ft.)orgreater
•250mm/2.5m(8.2ft.)orgreater
•300mmorlonger/Norestriction
D5000,D3000,D60,D40-Series
•200mm/5m(16.4ft.)orgreater
•250mm/3m(9.8ft.)orgreater
•300mm/2.5m(8.2ft.)orgreater
•350mmorlonger/Norestriction
F80-Series/N80-Series*
•200mm/3m(9.8ft.)orgreater
•250mmor300mm/2.5m(8.2ft.)orgreater
•350mmorlonger/Norestriction
F75-Series/N75-Series*,F70-Series/N70*
•250mm/5m(16.4ft.)orgreater
•300mm/4m(13.1ft.)orgreater
•350mm/3m(9.8ft.)orgreater
•400mm/Norestriction
F65-Series/N65-Series*,F60-Series/N60*,
F55-Series/N55-Series*,F50-Series/N50*,
F-401/N4004*,F-401x/N5005*,F-401s/
N4004s*,Pronea600i/6i*,ProneaS
Vignetting occurs at any shooting distance.
*Sold exclusively in the USA
■ Slip-in filter holderAlwaysusea(52mmscrew-on)filter.A52mmScrew-onNCFilterisattachedto
the filter holder when shipped from the factory.
1 Press down on the slip-in filter holder knob, and turn
counterclockwise until the white line on the knob is at
a right angle to the axis of the lens.
2 Pull the slip-in filter holder from the lens body
3 Detachtheattachedfilterfromthefilterholder.
4 Screw a filter onto the side of the filter holder marked
with the words “Nikon” and “JAPAN”.
•Theslip-infilterholdercanbeattachedwiththe
“Nikon” and “JAPAN” facing either the lens or camera
side without any effect on your pictures.