Nikon S2J00200401 user manual Aperture Lock, Aperture Setting pg

Exposure Indicators

If the subject is too bright or too dark to allow correct exposure, the electronic analog expo- sure display will flash and one of the following indicators will appear in the viewfinder and the control panel on top of the camera:

Subject too bright; choose a higher f/-number or use an ND filter.

Subject too dark; choose a lower f/-number or use a flash.

Aperture Lock

Aperture can be locked at the selected setting ( pg. 94).

2—EV Steps for Exposure Control ( pg. 161)

By default, adjustments to aperture are made in increments equivalent to 1/3 EV (1/3 step). If desired, the size of the increments can be increased to 1/2 or 1 step.

12—Assign Command Dial ( pg. 166)

This setting can be used to reverse the roles of the command dials so that the main command dial controls aperture while shutter speed is assigned to the sub-command dial.

22—Aperture Setting ( pg. 173)

Use this setting when you want to adjust aperture using the lens aperture ring. Note that aperture for type G lenses is always set using the command dials, regardless of the option chosen for Custom Setting 22.

ADVANCED PHOTOGRAPHY—EXPOSURE MODE

89