Nikon S2J00200401 user manual 214

Specifications (continued)

TECHNICAL NO TES— SPECIFICATIONS

Autofocus		TTL phase detection by means of Nikon Multi-CAM1300 auto-
		focus module; detection range –1 to 19 EV (ISO 100 at room
		temperature)
Lens servo		Instant Single-servo AF (S), Continuous-servo AF (C), manual (M);
		focus tracking automatically activated according to subject status
		in single-servo and continuous-servo AF
Focus area		Focus area can be selected from five focus areas
AF-area mode		Single-area AF, Dynamic AF (supports closest subject priority)
Focus lock		Focus can be locked using the AE/AF lock button or, in single-
		servo AF, by pressing the shutter-release button halfway
Exposure		TTL full-aperture exposure metering system with three meter-
	metering system	ing modes
	3D color matrix	3D color matrix metering using 1,005-pixel CCD supported when
		type G or D Nikkor lens is attached; with other lenses, color
		matrix metering using 1,005-pixel CCD is supported
	Center-weighted	Greatest weight (75% of total) given to a circle in the center of
		the frame 8 mm in diameter
	Spot	Exposure determined by 3-mm (0.12˝) circle in center of frame
		(approximately 2% of frame); when a CPU Nikkor lens is attached,
		any of the five focus areas can be used for spot metering
Exposure range		At ISO 100, room temperature, and with f/1.4 lens: 0 – 20 EV
		(center-weighted or 3D color matrix metering) or 2 – 20 EV (spot
		metering)

Exposure meter coupling

Exposure modes

Combined CPU and AI

PProgrammed auto with flexible program S Shutter-priority auto

A Aperture-priority auto

M Manual (exposure adjustable in steps of 1/2 or 1/3 EV)

Exposure	–5 to +5 EV in increments of 1/ EV; exposure compensation indi-
compensation	3
	cator appears in viewfinder and top control panel
Auto-exposure lock	Locked at detected value when AE/AF lock button is pressed
Auto bracketing	2 – 3 exposures compensated in steps of 1/ , 1/		, or 1 EV
	3	2

214