Nikon S2J00200401 user manual Choose a white-balance setting Holding

.4	Choose a white-balance setting (		pp. 64–69)
1	Holding the	button down (A), turn the main command dial (B) until A
	(auto white balance) is shown in the rear control panel (C). At this setting, the
	camera will automatically adjust white balance to produce good results for
	most common light sources.
	A	B	C

.5	Choose a focus mode ( pp. 70–71)
1	Turn the focus-mode selector until it clicks into place

pointing to S (single-servo autofocus). The camera will automatically focus on the subject in the se- lected focus area when the shutter-release button is pressed halfway. Photographs can only be taken when the camera is in focus. Do not attempt to adjust focus using the lens focusing ring.

STEP 1

TUTORIAL—TAKING PHOTOGRAPHS

39