Nikon S2J00200401 user manual Caring forYour Camera, Replacing the Focusing Screen, 194

Caring forYour Camera

TECHNICAL NO TES— CARING FOR

YOUR CAMERA

Replacing the Focusing Screen

Your Nikon digital camera is supplied with a type B BriteView focusing screen. A type E clear-matte Fresnel screen for cameras in the D1 series, with a grid suitable for tracing and architectural photography, is available for separate purchase.

To change focusing screens:

1After turning the camera off, remove the lens (A). Using the tweezers supplied with the focusing screen, pull the focusing screen latch towards you (B). The screen holder will spring open.

A	82	2	B
		2
	53
	8
	2
	t m	50
	f
		0
		7
		5
		8
		5
		0
		1

2Remove the existing screen, using the tweezers supplied and being careful to handle the screen by the tab to avoid scratches (A). Using the tweezers to hold the screen by the tab, set the replacement screen in the holder (B). Push the front edge of the holder upward until it clicks into place (C).

A B C

Do not touch the mirror or the surfaces of the focusing screens.

Use only focusing screens designated for use with cameras in the D1 series.

194