Nikon S2J00200401 user manual 215

Shutter		Combined electronic (CCD) and mechanical shutter
	Speed	30–1/	sec. (1/ increments), long time-exposure (bulb)
		16,000	3
Flash
	Sync contact	X-contact only; flash synchronization at speeds of up to 1/ s
			500
	Flash control	• Automatic balanced fill-flash controlled by five-segment TTL
		multi-sensor with single-component IC
		- 3D multi-sensor balanced fill-flash for D1 series (SB-80DX,
		SB-50DX, or SB-28DX with type G or D Nikkor lens)
		- Multi-sensor balanced fill-flash (SB-80DX, SB-50DX, or SB-28DX
		with AI-P Nikkor or Nikkor lens of a type other than type G or D)
		• Auto-aperture (AA) flash (SB-80DX, SB-50DX, or SB-28DX with
		CPU Nikkor lens)
		• Non-TTL auto flash (with SB-80DX, SB-28DX, SB-28, SB-27,
		SB-22s, and other Speedlights)
	Flash sync modes	Front curtain (normal) sync, red-eye reduction, red-eye reduc-
		tion with slow sync, slow sync, rear curtain
	Flash-ready light	Lights when SB-80DX, SB-50DX, SB-28DX, SB-28, SB-27, or SB-22s is
		fully charged; blinks for three seconds after being fired at full output
	Accessory shoe	Standard ISO hot-shoe contact with safety lock
	Sync terminal	Standard JIS terminal with locking screw
Self-timer		Electronically controlled timer, duration 2–20 seconds
Depth-of-field		Lens aperture stopped down when pressed
	preview button
Remote control		Remote control via 10-pin remote terminal or IEEE 1394 inter-
		face (designed for speeds of up to 400 Mbps)
Monitor		2˝, 130,000-dot, low-temperature polysilicon TFT LCD with ad-
		justable white LED backlight and brightness adjustment
Power source		EN-4 Ni-MH Battery Pack, 7.2 V DC (can be recharged with op-
		tional MH-17, MH-16 or MH-15 Quick Chargers); EH-4 AC adapter
		(sold separately), 100 – 240 V AC
Tripod socket		1/ ˝ (JIS)
		4
Dimensions		Approximately 157 ⋅ 153 ⋅ 85 mm (6.2˝ ⋅ 6.1˝ ⋅ 3.4˝)
	(W ⋅ H ⋅ D)
Weight		Approximately 1,100 g (2.5 lbs) excluding battery

TECHNICAL NOTES—SPECIFICATIONS

215