Nikon S2J00200401 user manual Nikon SB-80DX Speedlight, Nikon SB-50DX Speedlight, 206

Optional Accessories (continued)

TECHNICAL NO TES— OPTIONAL A CCESSORIES

Nikon SB-80DX Speedlight

This high-performance Speedlight has a Guide Number of 53 (manual mode, 35-

mmzoom-head position, ISO 200, 20 °C/68 °F) and accepts four LR6 (AA) alkaline

batteries or SD-7, SD-8A, and SK-6 power sources (all available separately). For bounce-flash or close-up photography, the flash head can be rotated through 90 ° up, 7 ° down, 180 ° left, and 90 ° right. Light from the flash can be diffused for wide-

angle photography by using the SB-80DX in combination with a wide panel or bounce adapter, producing soft lighting that balances the foreground subject with the back- ground in close-ups and bounce-flash photography. The SB-80DX is equipped with an illuminator to assist in adjusting settings in the dark. Custom settings allow you to fine-tune all aspects of flash operation.

Nikon SB-50DX Speedlight

This Speedlight has a guide number of 32 (manual mode, 35-mm zoom-head posi- tion, ISO 200 m, 20 °C/68 °F) and is powered with two CR123A or DL123A type 3V lithium batteries. When attached to cameras in the D1 series, it supports D-3D multi-sensor balanced fill-flash for natural, balanced light, even when the scene con- tains highly reflective objects or the background is very far from the camera. The SB- 50DX is equipped with an AF-Assist Illuminator, allowing autofocus to be used when shooting very dark subjects. It also boasts auto power zoom that changes the flash angle according to the focal length of the lens, and supports Slow Sync, Rear-Curtain Sync, Manual flash modes. It offers a tilt position of –18°, allowing the flash to be used at ranges as close as 30 cm (11.8˝).

Accessories for the Remote Terminal

Your Nikon digital camera is equipped with a ten-pin re- mote terminal for remote-control photography, automatic photography, and connection to other devices. The ter- minal is provided with a cap, which protects the contacts when the terminal is not is use. The following accessories can be connected:

2 2

82 53 82

50 t m f

0

7

5 8

5 0 1

206