S301416

SERVICE MANUAL

DISASSEMBLY/ASSEMBLY OF SENSOR FOR ENGINE START-UP INHIBITION WHEN THE DRIVE PEDAL IS PRESSED

1.Engage the parking brake with the lever (66).

2.Turn the ignition key (76) to OFF position and remove it.

3.Cut the cable clamp (A) under the right side of the cab.

4.Disconnect the connector (B) of the sensor for engine start-up inhibition (C).

5.Remove the four mounting screws (D) of the drive pedal (E).

6.Slightly lift the drive pedal (E) and remove the mounting nut (F) of the sensor (C).

7.Remove the sensor (C), the harness (G) and the connector.

8.Assemble the components in the reverse order of disassembly.

9.Adjust the sensor for engine start-up inhibition (see the procedure in the relevant paragraph).

F C G

33015500(3)2008-02

RS 501

Nilfisk-Advance America RS 501 service manual S301416