
ENGLISH
SERVICE MANUAL
DRIVE SYSTEM
REVERSE GEAR BUZZER CHECK AND REVERSE GEAR BUZZER ACTIVATION SENSOR ADJUSTMENT
Check
1.Check that, when the machine moves in reverse, the relevant buzzer sounds. If necessary, adjust the relevant sensor according to the following procedure.
Adjustment
2.Engage the parking brake with the lever (66).
3.Turn the ignition key (76) to OFF position and remove it.
4.Check that the surface (A) of the sensor (B) is fl ush with the surface (C) of the drive pedal.
If necessary, loosen the sensor mounting nut (D) and adjust the sensor position. When the adjustment is completed, tighten the nut (D).
5.Check that the distance between the sensor surface (A) and the bracket (E) is within 1.5 and 2.5 mm. When checking, move the drive pedal (F) towards the bracket (E) to cancel the drive pedal end play.
If necessary, loosen the nuts (G) and the nut (H), and adjust the position of the bracket (E). When the adjustment is completed, tighten the nuts (G) and (H).
6.Perform step 1 again.
F
A C
E
D B
GE
H
G
S301410
66
RS 501