ENGLISH
SERVICE MANUAL
SWEEPING SYSTEM
BROOM SPEED ADJUSTMENT
Speed measurement
1.Engage the parking brake with the lever (66).
2.Turn the ignition key (76) to OFF position and remove it.
3.Connect a speed measurement indicator with a portable tachometer to the broom (10) or (11).
4.Start the machine and run the engine at maximum speed and set the broom speed adjuster (127) to maximum speed (as shown in the User Manual). In this condition, measure the broom speed with the portable tachometer. Turn off the machine. The broom speed must be: 80 rpm
If necessary, change the broom speed according to the following procedure.
Speed adjustment
5.Remove the screws and the right panel (22) in the cab.
6.To change the broom speed, loosen the locknut (A) and turn the screw (B), then tighten the locknut (A).
7.Perform step 4 again.
B
A
S301510
22
RS 501
