ENGLISH
SERVICE MANUAL
ELECTRICAL SYSTEM
LOW BEAM AND HIGH BEAM ADJUSTMENT AND BULB REPLACEMENT
Preliminary operations
1.Drive the machine on a solid and level ground, then engage the parking brake with the lever (66).
2.Turn the ignition key (76) to OFF position and remove it.
Bulb replacement
3.Remove the screws (A) and move the headlight (B).
4.Replace the burned bulbs.
5.Install the headlight (B) and fasten it with the screws (A).
6.Adjust the headlights according to the following procedure.
Low beam adjustment
7.Use the screws (C) and (D), in the following way:
•To adjust the beam vertically, turn the screws (C) and (D) simultaneously;
•To adjust the beam horizontally, turn the screws (C) and (D) individually.
D
A
C
AB
S300929
142
RS 501
